Oil Sensor (Temperature or Pressure) Adapter for Nissan Z32 300zx

The oil pressure sensor on your Z32 300zx is notoriously inaccurate, largely due to the tendency for your sensor to block up over time. Many owners opt to fit an aftermarket gauge and this adapter allows you to add an additional sensor without disabling your factory sensor.

This adapter features the correct BSPT thread size to all you remove your factory sensor, fit the adapter, refit the factory sensor and then for an aftermarket 1/8npt sensor on the Tee side of the fitting.

Adapter specifications are as follows

• 1/8 BSPT male thread on run
• 1/8 BSPT female thread on run
• 1/8 NPT female thread on Tee
• Includes optional crush washer; not usually required with tapered threads

Please note that fine debris from manufacturing may be present on the adapter so, as should always be the case, clean thoroughly before install. 

Installation instructions can be found HERE.

Free delivery to AUS only. International orders will be invoiced for freight after checkout.